|Home||» Products||» Wire Flame Spray Gun||» 12m Wire Flame Spray Gun|
12m Wire Flame Spray Gun
All metals and metal alloys in wire form can be used with 12 M Wire Flame Spray Gun for spray coating like Zinc, Copper, Aluminum, Brass, Steel, Stainless Steel, Molybdenum, Nickel Alloy etc. Standard Wire size used are 1/8"(3.17mm), 5/32"(3.97mm), 3/16"(4.76mm)
- To provide Anti-Corrosion Coating
- To Improve Wear Resistance Properties
- To Reclaim Worn out Parts
- To Enhance Electrical Conductivity
- To Create Thermal Barrier Coating
- To Decorate Articles of varied Material
Extension Nozzles: Where deep bores are to be sprayed, our nozzles are available. These nozzles allow access of the spray at depths upto 1.1 Mtr., whilst straight and deflector air caps can be selected to direct the spray stream to the area required. Its typically used in spraying in internal diameter or hard to reach coating surfaces. Its installation is easy by removing the standard Air Cap Body and Siphon plug & replacing it with the extension. This can be done in about 1-2 minutes without any tools. Our nozzles are available in different lengths for both Oxy-Acetylene and Oxy-Propane Gun.
Air Control Unit: Coprises of air filter cum regulator for secondary filtration & regulating air flow to wire flame spray gun. An additional outlet gives connections for operator's helmet. Pressure Rating: 10 Bar
Hose Kit: Comprises of Hose to connect oxygen cylinder and fuel gas cylinder with flow meter to spray gun.
Gas Flow Meter: Our offered flow meter are recommended to use with Flame Spray Equipment. Ease of reading helps economic operation and fast fault diagnosis. The unit consist of separate flowmeter for both Oxygen and Fuel Gas supplies.
Air Flow Meter with Hose: It is a highly perfect rugged and reliable instrument for regulating and measuring the flow of compressed air in a wire combustion spray system.
Model: 3AFM (Air Flow Meter) Flow Unit in both NLPM & SCFM
Wire Control Unit: The Wire Reel Stand with Straightener is specifically designed to dispense wires for flame spraying. A wire straightener is included and the unit is capable of handling either reeled or loose coiled wire or spool.
Spray Booth: It is used for controlling sprayed dust and fumes when metallizing operation takes place. It carries away metal dust particles as well as heat. Duct work has adjustable pipe length as well as ball joint to fit individual requirement.
Metal Spray Wire: Standard materials wires such as Aluminium Alloy, Tin, Aluminium, Tin Alloy, Nickel, Nickel Alloy, Zinc, Stainless Steel, Brass, Molybdenum, Monel, Copper & many more are available.
Wire Size Standard
Wire Size Optional
15G, 11G, 3/16" (4.76mm)
Air Turbine (pneumatic)
35CFM at 75psi (5 bar)
Approx 2.7Kg (Gun Only)
Acetylene/ LPG/ Propane