ARC SPRAY GUN (DC DRIVE)

Model: 102DC

Arc Spray System Setup

SPECIFICATION

Type Feature Description
Size 440mm (L) x 80mm (W) x 185mm (H)
Drive 24V DC Semi Servo Motor
Net Weight 4.5Kg.

Power Source with Control Console

Model: 100DC

The control consul works for two operating modes called as Pneumatic and electric driven for supplying metallizing wire to the spray nozzle. In the first mode the spray gun is hand held and pulls the wire into the nozzle to get atomized. Where as in second mode the Wire Arc Spray Gun (DC Drive) is attached to an electric driven motor to pull the wire into the spray system. When there is a need to operate the wire arc spray equipment in Lathe Tool post or robot Wire Arc Spray Gun (Air Drive) is recommended for manual operation as it is light in weight. The system is completely mobile and is mounted with trolley wheels for the ease of movement according to the need of operation, A high velocity air facility is inbuilt in the control panel to increase the velocity of the particle for enhanced deposition efficiency, bond strength and fine spray.
FEATURES
Arc Spray System Model 250 AMP 400 AMP 600 AMP
Max Melting Output (KG./HR.) Zinc: 15.00
Aluminum: 4.30
Cr-Ni-Steel: 6.60 - 7.15
Al-Bronze: 7.50 - 7.95
Zinc: 30.00
Aluminum: 8.60
Cr-Ni-Steel: 13.20 - 14.30
Al-Bronze: 15.00 - 15.90
Zinc: 45.00
Aluminum: 12.90
Cr-Ni-Steel: 19.80 - 21.45
Al-Bronze: 22.50 - 23.85
Maximum Coverage (M /100M/HR) Zinc: 13.05
Aluminum: 13.03
Cr-Ni-Steel: 7.29
Al-Bronze: 10.90
Zinc: 26.10
Aluminum: 26.06
Cr-Ni-Steel: 14.58
Al-Bronze: 21.78
Zinc: 39.15
Aluminum: 39.10
Cr-Ni-Steel: 21.87
Al-Bronze: 32.67
High Velocity option installed No On Request Yes
Wire Size (Diameter) 1.6mm to 2mm 1.6mm to 3.17mm 2mm to 3.17mm
Wire Feed Both Pneumatic & Electric Drive Both Pneumatic & Electric Drive Both Pneumatic & Electric Drive
Power Source with control console weight 117 kgs. (approx.) 156 kgs. (approx.) 333 kgs. (approx.)
Dimension 37” x 18” x 39” 40” x 22” x 43” 36” x 26.5” x 45”
Power Requirement 7KW / 9.5 HP 15KW / 20 HP 25KW / 33.5 HP
POWER SOURCE INPUT Voltage (V): 415V±10
Phase (nos): 3
Frequency (Hz): 50
Rating:@60% Duty Cycle: 22.5 (KVA)
Rating:@100% Duty Cycle: 18 (KVA)
Voltage (V): 415V±10
Phase (nos): 3
Frequency (Hz): 50
Rating:@60% Duty Cycle: 22.5 (KVA)
Rating:@100% Duty Cycle: 18 (KVA)
Voltage (V): 415V±10
Phase (nos): 3
Frequency (Hz): 50
Rating:@60% Duty Cycle: 39 (KVA)
Rating:@100% Duty Cycle: 31 (KVA)
Power Source Output Static Characteristics
Open Circuit Voltage Range: Constant Potential 18-40
Static Characteristics
Open Circuit Voltage Range: Constant Potential 18-54
Static Characteristics
Open Circuit Voltage Range: Constant Potential 65
MAX. OUTPUT CURRENT @60% Duty Cycle: 250 (Amp.)
@100% Duty Cycle: 190 (Amp.)
@60% Duty Cycle: 400 (Amp.)
@100% Duty Cycle: 310 (Amp.)
@60% Duty Cycle: 600 (Amp.)
@100% Duty Cycle: 465 (Amp.)

PORTABLE WIRE FEED & GUN STAND

HOSES & CABLES

error: Content is protected !!